Ready mixed fluid

Description

Ready mixed solar fluid

Supplied in easy to handle 10l glycol containers. These are ideally suited to servicing or commissioning thermal high pressure heating systems.

Ready mixed solar fluid make the commissioning of any system simple and quick, as there is no need for testing to make sure the fluids are within workable refractometer tolerance.

In the summer if the solar heating fluids are too week then the fluids will boil inside the pipe work which will uncontrollably increase temperatures. With a subsequent reverse situation in winter, solar fluids if too week in concentrate will not perform well in lower temperatures and possibly freeze.

The simple answer is to drain your existing fluid into a suitable container and replace with our ready mixed thermal heating fluid every year as an annual service program.

Solar hot water fluids may contain contaminants due to stagnation. In any event the old solar heating fluids should only be handled using suitable work wear. Therefore it is very important to dispose of old glycol fluids in a safe and proper manner.

Parts in this solar heating group:

Solar tube connectors DN12	Solar tube connectors DN16	Solar tube brackets
Solar fluid	Solar flexible tube connection set	Solar C clips
Solar fiber washers	Solar pump station connectors	Solar tube lead slate
Pressure relief valve	DZR compression tube straight connector	DZR compression elbow connector
Compression tube insert DN12 or DN16	DZR compression tube to fiber washer flat face connector	DN16 x 22mm male adaptor
Temperature sensor cable outside	Temperature sensor cable inside	Immersion heater switch